S-Bond Plus LSE Grey. Acrylic foam core High-bond tape. Thickness 0.64mm – 2mm

From £13.42 Excl. VAT

Stikon LSE Plus High-bond structural bonding tapes. This grey extruded adhesive is typically used to bond powder coated paints, metals, glass, sealed wood, acrylic, polycarbonate and ABS. When applied these tapes are fully weatherproof with a naturally increasing bond strength over time.

  • Application without tools or the need to drill holes.
  • Superior outdoor performance, UV and solvent resistance
  • Highly ageing resistant
  • Stress distributed over the whole surface
  • Absorption of vibrations
  • Forms a barrier to moisture and contaminations, less corrosion
  • Various thickness options for ideal balance of stiffness and gap fill

With a range of thicknesses from 0.64mm up to 2.0mm there is a perfect balance of stiffness, gap fill, cushioning and stress absorption for any application.

Self-bond single-pass UV-curing technology means significantly less impact on the environment during manufacturing process, no solvent evaporation required.

 

Volume discounts applied in shopping cart

6-11 Rolls - 25%
12-23 Rolls - 33%
24+ Rolls - 40%

SKU: AFS-57xx Category: Tags: , , , , , ,

Stikon LSE Plus High-bond structural bonding tapes. This grey extruded adhesive is typically used to bond powder coated paints, metals, glass, sealed wood, acrylic, polycarbonate and ABS. When applied correctly these tapes are fully weatherproof with a bond strength that naturally increases over time.

Using a unique self-stick formulation our LSE Plus is a pure extruded acrylic resin with inherent ability to adhere to lower energy surfaces. The resin is mixed, extruded and UV-cured. The whole process leaves very little waste and requires no solvent coating or evaporation. The result is not only a high-end and versatile permanent bonding tape for numerous applications, but also less harm to the environment.

  • Application without tools or the need to drill holes.
  • Superior outdoor performance, UV and solvent resistance
  • Highly ageing resistant
  • Stress distributed over the whole surface
  • Absorption of vibrations
  • Forms a barrier to moisture and contaminations, less corrosion
  • Various thickness options for ideal balance of stiffness and gap fill

S-Bond LSE Plus is used for application where a structural bonding tape is required. Sign making, badge and trim mounting, automotive manufacturing and repair, electronics and white goods. The adhesive builds holding power over time and keeps out moisture and contaminants.

With a range of thicknesses from 0.64mm to 2.0mm there is a perfect balance of stiffness, gap fill and cushioning for any application. Roll widths available from 6mm.

Application instructions: Clean the surfaces, apply the tape with pressure. Hold the pressure if possible, for 24 Hours.

Roll length is 33m / 16.5m

Additional information

Thickness

0.64mm, 0.8mm, 1.1mm, 2.00mm

Roll Width

12mm, 15mm, 19mm, 22mm, 25mm, 30mm, 40mm, 50mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Stikon Tapes

Stikon Tapes

Optimized by Optimole